helix angle

1. Effect of Helix Angle Errors on Transmission Error of Double Circle Arc Helical Gears
   双圆弧齿轮的螺旋角误差对其传动误差的影响分析
2. Optimal design of variable helix angle bevel gear based on hybrid ant colony algorithms
   基于混合蚁群算法的可控螺旋角锥齿轮传动的优化设计
3. Mixing drum; Helix angle; Numerical simulation;
   搅拌筒；螺旋升角；数值模拟；
4. The way of calculating the parameters of modulus, pressure angle and helix angle of the gear masters that are used to calibrate gear instruments is in detail in this paper.
   本文详细介绍了用于齿轮仪器校准的齿轮样板模数、压力角、螺旋角等参数计算方法。
5. The formulation of the helix angle of the device with tapered thread is deduced.
   推导了锥螺纹的螺旋升角计算公式。
6. Often described as a slender body of a white horse, the amount before a helix angle ( which is also a characteristic of the Licorne).
   通常被形容为体型修长的白马，额前有一螺旋角（这也是独角兽的特征）。
7. Helical gear with helix angle
   带螺旋角的螺旋齿轮
8. Helix angle equations, limited curve equations and induced normal curvature equations are also obtained.
   推导了球面包络环面蜗杆的接触线方程、齿面方程、螺旋升角、一界、二界曲线和诱导法曲率方程。
9. The Evaluation of Gear Pressure Angle or Helix Angle Using Least Square Method and Least Zone Method
   齿轮压力角或螺旋角误差的最小二乘法和最小区域法评定
10. Influence of Milling Cutter's Helix Angle on the Working Accuracy Test of Milling Machine
    铣刀螺旋角对检验铣床工作精度的影响
11. The points-line meshing gear is different from involute gear in choice of helix angle.
    点线啮合齿轮螺旋角β的选择，改变了渐开线齿轮为凑中心距或者从优化角度来选取β值的情况。
12. Effects of Boundary Condition and Helix Angle on Meshing Performance of TI Worm Gearing
    边界条件和螺旋角对TI蜗杆传动啮合性能的影响
13. This paper analyzes the regularity of coil shift angle and helix angle variation and their effects on bobbin forming.
    本文分析了纱圈位移角和卷绕角的变化规律及其对筒子成形的影响。
14. On this condition, compared influence of Errors of the center distance and helix angle to dynamic performance of double circular arc gears.
    在此基础上，太原理工大学硕士研究生学位论文对比分析了齿轮中心距和螺旋角对双圆弧齿轮的动态传动性能的影响，并给出了具体的补偿办法。
15. There is no common normal in the conical involute gear and the fixed chordal tooth thickness can not be measured accurately because of the coexistence of helix angle and taper.
    渐开线锥形齿轮由于同时存在锥度和螺旋角，使得其固定弦齿厚无法精确测量，也没有公法线。
16. Practicable Methods of Measuring Helix Angle of Helical Gear
    测定斜齿轮螺旋角的实用方法
17. Finally, the part parameters of vidicon are demarcated, the factors that affect the precision of drill orientation and inspecting of drill's helix angle are analyzed, correlative measures are advanced.
    最后对摄像头的部分参数进行了标定，对影响视觉定位检测精度的因素进行了分析，提出了相关解决方法。
18. This paper puts forward a new method of optimizing geometric parameters for involute external modified gears: the formula of the four parameters& optimizing pressure angle, helix angle, modification coefficients and addendum coefficient. It also introduces various technical measures for avoiding interference and enhancing strength.
    本文提出了渐开线外啮合变位齿轮几何参数优化设计的新方法-优选啮合角、螺旋角、变位系数、齿顶高系数四项参数的数学公式和避免各种干涉、增加强度的技术措施。
19. Meanwhile, the article analyzes the vision inspecting measure for helix angle, brings forward the calculational methods of helix angle based on computer vision.
    分析了钻头视觉定位的原理，提出了钻头视觉定位的实现方法，同时对钻沟螺旋角的视觉检测方法进行了分析，提出了基于计算机视觉的螺旋角的自动检测方法。
20. Through the analysis of rotating EDM generating machining of variable helix angle gear, the requirement of shaping motion of this machine was put forward, and the design of mechanism and control system was described in detail.
    通过对渐变螺旋角齿轮回转电火花展成加工工艺的分析，提出了对机床成形运动的要求，并对机床机械结构和控制系统的设计进行了详细的描述。
21. This paper presents a method for machining of conical milling cutter with equal helix angle on universal milling machine, introduces equation of working milling cutter movement, proves the exactness and practicability of this method.
    提出了一种在万能铣床上实现等螺旋角锥铣刀的加工方法，并介绍了利用该方法加工锥铣刀时工作铣刀的运动方程，测试结果证明了这种方法的正确性和实用性。
22. According to the volume oil formula of the straight gear pump, the volume oil formula of the helical gear pump is got and the helix angle no trapping is found.
    利用直齿齿轮泵的困油容积变化公式，求出了斜齿齿轮泵的困油容积变化公式，得到了斜齿齿轮泵不发生困油的螺旋角。
23. Research on the Choice of Helix Angle of the Points-line Meshing Gear
    关于点线啮合齿轮螺旋角选择的研究
24. Besides, the relationship between the tooth shape and the helix angle, and the number of teeth are studied.
    分析了端面齿廓形状与螺旋角及齿数的关系。
25. But the helix angle is too large that would increase distance and BTA resistance.
    但螺旋角过大，则会增长排屑路程和排屑阻力。
26. The influence of module, tooth width, helix angle, and initial oil temperature on the steady-state temperature field is analyzed, in order to provide supports for the structural design.6.The heat balance analysis of high-speed heavy gears and steady-state temperature field analysis of gear body are prospected.
    分析模数、齿宽、螺旋角和初始油温对稳态温度场的影响，为结构设计提供支持。6、展望高速重载齿轮传动的热平衡分析和齿轮本体稳态温度场分析。
27. Helix angle θ and the leaf margins h1 has a clear impact of on separation efficiency.
    螺旋角θ和叶边距h1对分离效率有明显的影响。
28. In addition, by changing the structure design parameters of diamond drill bit simulate drill bit during drilling force to analyze the situation, comparative study of the drill core thickness, helix angle, spiral groove length on the stiffness strength of diamond drill bit.
    此外通过改变金刚石钻头结构设计参数，模拟钻削过程中钻头受力情况进行分析，对比研究了钻芯厚度、螺旋角度、螺旋槽长度对金刚石钻头刚度强度的影响。
29. By the traditional analysis of the equal helix angle edge curve model, a mathematical model of the equal spiral lead is established on the cylinder and sphere of the ball-end cutter.
    本文的主要研究内容为：1.通过对传统等螺旋角刃口曲线的模型进行分析，建立了球头立铣刀柱面、球面上等导程螺旋线的数学模型。
30. The impact of the gyration radius and the helix angle depend on different types of contours.
    母线轮廓的回转半径和螺旋角的影响取决于不同类型的母线轮廓。

noun

1. the constant angle at which a helix cuts the elements of a cylinder or cone